A Brief Insight into how to Assemble a Fireplace

Fireplaces can add to your interior decoration. These days, fire places are available in a wide range of different designs and patterns which can make your interior look truly attractive. With so many different options available these days, it can be a bit difficult for you to choose the best one. The history of fireplaces goes back to thousands of years. The main reason to install the fireplace is to get warm temperature and you need to consult with the fireplace construction agencies in this regards. Along with that, the safety measurement and outlet of the fireplace also need to be installed in a proper manner. People are now interested to install the durable fireplace in their homes, and some of them still prefer the permanent structure for their fire place. Whatever maybe your choice, the construction of the fireplace must be done in a professional manner only, and you need to contact with the top professionals in this field.
Professional Fire Place Construction
Construction of Traditional Fireplace:

When it comes to the designs of the fireplaces, there is a wide range of options which are available to you. The most common among them are the ones with traditional designs which are available in different finishes. In order to get the best one, you can opt for the professional fireplace construction, which would make your interior look majestic and royal.
  • You must read the instructions of the manufacturer properly.
  • Make sure that you have fitted the surround over a soft surface so that your floor remains undamaged
  • While you drill into the wall, you must look out for the hidden cables or pipes and must avoid them.
  • Finishing the Surround area and you need to make the concrete work after the installation of fireplace. 
  • There are two options available to you when it comes to selecting the color of a fireplace surround to match the color of your home.
  • You can opt for either of these techniques; however, you need to be sure to paint the front and back of the fire surround in order to increase stability.
Fire Place Construction
Hearths and Back Panels to Complete the Installation

To complete the installation of your fireplace, you can use hearth tray and a reversible back panel made of Laminate. These items are ideal for use, when it comes to electric or gas installations and is easily available.
  • Most of the back panel made of Laminate is made of craft paper equipped with resins which are heat resistant. A decorative laminate finish is applied to them while they are being manufactured.
  • When it comes to the best hearth trays available in the market, they should have a board which is non-combustible in nature.
  • There will be an opening required for the back panel which needs to be cut in order to accommodate the used appliance. 
  • When it comes to securing the back panel in place there are quite a few ways you can opt for. One of the most effective ways is by drilling a couple of oversized holes where the inside of the surround’s leg meets the panel. Then, with the help of a short wood screw they can be used to screw into the surround.
Fire Place
This was a brief insight into how to assemble a fireplace. It might sound quite easy; however, in order to get it done in the best possible manner, it is always advisable to opt for the professional fireplace construction service providers. They have the skills and the expertise to set up a perfect fireplace for you.

You Might Also Like

0 comments

Note: only a member of this blog may post a comment.