A toilet that is sluggish to fill or work, leaks, is noisy, or won't flush does not always necessitate the services of a plumber. Many problems can be solved with some simple DIY solutions. You must first understand how a toilet functions before you can troubleshoot and fix it. 

Before You Begin Toilet Repairs 

Below are some common issues and fixes. 

• If the tips beneath don't help you with toilet repairs, or in the event that you have any questions or inquiries regarding the fixes, contact an authorized handyman.
• Don't overtighten nuts, screws or different connectors. Over tightening metal equipment will break the toilet. Over tightening, plastic latches will harm them.
• To prevent damaging connectors and fasteners, use caution when turning them. Metal fasteners may be protected with tape on the jaws of pliers or a wrench.
• To avoid breaking the tank lid, raise it carefully and position it in a secure location.
• Check to see if the replacement parts you buy would suit your toilet. If you're replacing a toilet flapper, for example, choose from flexible or solid-frame and size 2-inch or 3-inch based on the old one. Taking the original component to the store to find a replacement can be helpful. 

Be Mindful:

Toilet Repairs

Turn off the water supply and clear the tank before performing toilet repairs, such as modifying and replacing the fill and flush valve assemblies, disconnecting the supply line from the tank, and removing the tank. Have a bowl or pan ready to catch the water that will run out when you cut the supply line. 

Let’s look at the most common toilet problems that can be repaired with DIY Tricks 

The Toilet Won't Turn Off 

A toilet that runs continuously wastes water and costs money because water is continually flowing into the tank through the fill valve. Typically, the issue is with the fill tank.

• Examine the flapper. If the flush valve opening is not sealed, water from the tank will escape into the bowl and the toilet will run continuously to keep the tank full. As required, replace the flapper.

   

• If the flapper appears to be in good condition or if toilet repair does not fix the issue, the entire flush valve assembly will need to be replaced.

• It's possible that the fill valve needs to be cleaned or replaced. If you have an older fill valve or ballcock, now is the time to replace it with a new fill valve.

• Debris in the fill valve may cause the water shut-off mechanism to malfunction. Clean out contaminants from your fill valve according to the manufacturer's instructions.

Leaks In The Toilet

Toilet Repairs

• As soon as you find a leaking toilet, take action. Your floor and subfloor would be harmed by water. When cleaning up a leak, wear protective gloves because you may be dealing with wastewater.

• 1/8 turn the nut behind the valve to tighten it. Take caution when using the supply pipe. It's possible that you'll have to keep the pipe when turning the nut.

• Check and tighten the supply line link to the supply valve if necessary.

• Examine the supply chain. Replace the supply if it is damaged or more than five years old.

• Check and tighten the supply line link to the toilet if necessary.

• Make sure the fill valve assembly is securely fastened to the tank's rim. 

Conclusion:

Honestly, the above-mentioned tips is only the tip of the iceberg, there is more when it comes to toilet repairs. So, if you want to keep your home clean and hygienic the most essential part is to keep your toilet clean. If possible do a toilet repair monthly or sign a contract with toilet cleaning services.