­
­

All About Starter Motor Replacement

In case you have an issue starting your vehicle or car, it may mean that you need to go for a starter motor replacement. Either you could ask for professional help or go for the starter motor replacement yourself. It is best to go for a team of qualified mechanics in case you are not too confident about how the motor works or its replacement.

Starter Motor Replacement
Starter Motor Replacement

Some signs you need starter motor replacement

Some of the most common issues that you might face with your car starter motor include:
  • The engine doesn’t turn over
  • When you turn the key, you hear a clicking sound
  • The car doesn’t turn at all
  • There is a spinning noise when the key is turned
In case you find any of the above issues with your vehicle, it points to the need for starter motor replacement. It is essential to strip down the motor to trace the fault and do the repairs. For those who are confident that they know about their vehicle and its motor can do the starter motor replacement on their own. Here are some essential steps to follow.
  • Turn off the engine and the emergency brake set and lift the car with the help of jack stands. Now, lift the hood to remove the battery cable and make sure that it is clear of battery.
  • Remove all access shielding and covering once the battery is disconnected and expose the starter terminals to access the battery cable and trigger wire.
  • Use a small socket or wrench to remove the solenoid trigger wire of the starter and the positive battery cable.
  • Locate the starter mounting bolts and remove them carefully for starter motor replacement.
  • Now hold the starter and remove it from the bell housing area, and inspect the condition of the flywheel gear
  • Remove the old starter and install the replacement unit properly.
  • Set up the starter motor carefully and be wary of the magnets which are brittle. Now, place the starter into the transmission bell cover and use hands to place the mounting bolts and thread.
  • Use a socket to tighten the starter bolts and then insert the positive battery cable and hold the positive battery and use a wrench to tighten both battery cable and trigger wire.
  • Reinstall the terminal cover once the nuts have been tightened and check all wiring connections before you lower the car cable to battery terminal when reconnecting the negative battery cable
Turn the ignition key once the starter motor replacement job is over. In case the starter does not work, it means you need to recheck the wiring, bolts, and connections. If you are not confident about the task, all need to do is get in touch with an expert repair service for starter motor replacement, service work, and repairs. Let their mechanics come at a convenient time for vehicle service needs. The mechanic will come and test the starter motor and replace it if needed. He will examine the ring gear/flexplate and check and adjust the drive belt. He will also look into the alternator and charging system as well as test the battery. Ask for competitive quotes and timely services with minimum costs. As a customer, you need honest, professional services at a reasonable price.

At times the damage is beyond repair, and one needs a starter motor replacement as it can be difficult to deal with those repairs at home. Make sure that the service you hire uses authentic parts and offer warranted services. Sometimes, it is a lot cheaper to replace the motor with an exchange unit as the motor is probably not worth repairing.

You Might Also Like

0 comments

Note: only a member of this blog may post a comment.