An inverted airbag compartment have the bags are attached to the cell plate under the bag slot and suspended on top of the frame, and the adjustable midline of the dedicated Hebro joint. The sack and its ashes are in a research sack that enters the Familiar River and fills the interior of the porch. It does not allow compartments to constantly transform into Bag houses.

Before the cleaning cycle, the filtering is interrupted. The inverted part of air powder was released from the solution to be collected under pressure in a small chamber by means of a small bag. The pressure caused in reverse air dust collector the bags to expand on the elasticity calculation side, which causes HOPPER-like powder to form on the cake. At the end of cleaning cycle,  reverse airflow stops and main flow is returned to the cell.

Monitoring the dirty gas

Reverse Air Dust Collector

Monitoring of dirty gas flow in the reverse air dust collector maintain the shape of the bag. This is done so that the fabric of our work and does not suffer destruction in the cleaning cycle. Hard rings are sewn to the doors that you approach and count. In situations like an earthquake, the space required for air in relation to all your bags; however, the maintenance requirements are slightly higher. Particles that form in many industrial plants and industrial processes turn into hot exhaust gases and dust. This is the land of smoke. Most vapours come back to keep passing, so electrostatics ALIVE. Production and fresh air go through the stove and in a hurry.

Role of precipitator

Precipitators typically collect about 99.9% or more of dust from the gas stream. Compressed air is then accelerated by a venturi nozzle mounted at the reverse-jet baghouse on top of the bag. Since duration of the compressed-air burst is for a short while (0.1seconds). This is why it acts as a rapidly moving air bubbles and then it travels through the entire length of the bag and causing the bag surfaces to flex into it. The reverse air dust collector breaks the dust cake and makes it better.

REVERSE-PULSE-JET

In middle of the reverse air dust collector there are pulse jet bag slots, the individual bags are supported by a wire mesh (retention filter) connected to the cell plate on top of the bags. When placed out of the entryway, the bag filter flows into the developer. Metal mesh will not fall into the bag for sure. Inverted bag are air filtered. Money bags are purged with compressed air and ordinary customers inject force at the master's orders in no time. Aventuri compressed air nozzle is more convenient to be accelerated by the force bag slot.

Faster air movement

Reverse Air Dust Collector

The compressed air noise button (0.1 sec) for a short time moves the air faster, negotiating with the entire flexible surface of the bag. These dusty bread bags and shaky movements fall under the permission of the funnel. The reverse air dust collector should be from the pulsating flow because dust is a hammer blast. When compressed air is blown by collectors through the entire book that dies of dust, it never has the least amount of air.

Due to this feature, jet dust collector  is generally not segmented. The cycle was short and not reversed for recirculation and reduced re-deposition of the collectors. These provide the tax that is charged and the air that the bags irrigate in a deeper and native way, or in a clean situation, and vice versa. In addition, this function allows it to run continuously in proportion to the air height of the fabric, thus requiring less space in the reverse air dust collector.