4 Mistakes to Avoid while Planning Air Conditioning Installation
- 02:36
- By Kiara Waylen
- 0 Comments
The air conditioning system has become an essential household gadget that is mandatory to beat the scorching heat of summer. The gadget is common both in residential and commercial buildings. But sometimes, you might notice that the cooling is not optimum even when you have recently purchased the AC. Is it the symptom of a serious issue with the machine, or was there a problem during air conditioning installation?
The latter is a critical question, and unless you know the importance of proper installation for the perfect functioning of the system, it is difficult to determine the issue. With the incorporation of many advanced features in the gadget nowadays, the air conditioner must be responsible for complete comfort within the residential or commercial setting. It is time to learn about some common mistakes during installation and how they can affect the performance of the machine.
1. Incorrect Sizing
Misconceptions have always been the root of mistakes. Most of you think that installing a big size AC implies super-cooling, but it is not so. The correct process begins with hiring an experienced company for consultation regarding the right size of AC to buy and for the correct air conditioning installation.
- The capacity of the machine should be enough to cool up the room to install the AC.
- The wrong size will cause lower cooling of the area or overcooling. In case the room is bigger than the cooling capacity of the machine, space will show signs of dehumidification.
- You can depend on the size suggestion depending on the square foot area of the room, but there are many other factors that affect the determination of the accurate size of the machine. Hence, the right decision is to consult the air conditioning installation service provider.
2. Incorrect Wiring
It is always feasible to hire expert technicians for installing your air conditioner as a technician with little practical experience can make a mistake in the weight distribution and the wiring connection. The wiring system has complications, and if the output is not right, then the machine will suffer. Electric disaster is inevitable when there is some major glitch in the wiring. The danger is more when you have exposed wire.
- Weight distribution is also an important factor in air conditioning installation, as it involves the set and prep of the AC unit.
- The factor is vital if installing a window air conditioner as a sturdy support to hold the machine at the right angle is mandatory for the cooling effect.
- You need to have sturdy brackets of wood or metal and must ensure that the AC fits properly on it.
3. Insulation Check
The HVAC system can never work properly if you do not have a well-insulated room. Usually, the technicians check the room before air conditioning installation so that they can detect the leaks and gaps and suggest locking the gaps. It will enhance the efficiency of the system as with complete insulation, and there will be no air escaping from the room. As a result, there will be no pressure on the HVAC system, and the power consumption will be lower. The workers will also provide you with the right suggestion regarding the correct placement of the unit for maximum cooling effect.
4. Refrigeration pipe
A real professional expert can only execute the proper installation of the refrigeration pipe.
- The lengths of the pipes that connect the indoor and the outdoor units should be accurate.
- The angle of the bends needs a necessary cushion to prevent wear and tear of the pipes.
Conclusion
So, the installation process is overly critical for the correct functioning of the air conditioner.
0 comments
Note: only a member of this blog may post a comment.