­
­

6 Ways Through Which You Can Deal With Blocked Drains

Blocked drains are one of the most customary plumbing problems that people encounter every day around the world. Left untreated, blockages can cause water to drip from your drains, potentially harming your home or business facility. Severe blockages can also result in burst pipes, which can need even more costly repairs. In this regard, you need to hire blocked drain specialists to clean your drainage system and they can locate the clogged area with CCTVs. Even they can repair or replace underneath drainage lines with new PVC pipes.

DIY methods to clean your blocked drain:

You can try some DIY methods to clean your blocked drain and here you can find few options to get rid of blocked drains.

Boiling water: - You can pour boiling water into the drain. In numerous cases, this is enough to loosen or thaw the blockage without having to resort to more extreme measures. Only use this method on metal or ceramic pipes, as the heat can free joints on PVC pipes. This method can be useful on grease or food build-up, but it is unlikely to work for solid blockages.

Caustic cleaner: - You can purchase caustic chemical drain cleaners from your local hardware store or supermarket. These chemicals are able to dissolve grease, hair, food, and other general foreign substances. However, they are toxic to the environment and should be used carefully. Caustic cleaners will not work on solid masses, like tree roots or small household items. Always guard your hands and face when working with chemical cleaners and flush your pipes with water after using such harmful chemicals.

Plunger: - A plunger can clear a blocked drain just as it can clear a jammed toilet. Be sure to cover any overflow spouts before you start plunging so you can get a powerful seal. The up-and-down pressure generated by the plunger can help to release any blockages. Plunging is most useful for solid blockages, but it is not very useful for grease build-up and mineral deposits.

Plumber's snake: - A plumber’s snake, or electric eel tool, is suitable for more severe blockages. The rotating coil at the end of the cable spins swiftly, chipping away at the blockage till it has been cleared. Snakes have defined the range, though, so the blockage needs to be near the opening of the drain for them to be useful. They also have the possibility of damaging your pipes, so it is best to try other means first. You can purchase plumbers’ snakes at most hardware stores, or you can hire an authorized plumber to do the job for you.

Hydro-Jet: - Hydro-jets force a strong stream of water through your pipes. The force that is created then forces the blockage through the pipes and out so that water can flow within once more. This process is much safer for your pipes than snaking, although it is not as productive against solid blockages. It is likely better to leave this task to a professional plumber who will have the knowledge to do the job properly.

Excavation: - In the most severe cases, your pipes may require full excavation. A plumber can know the exact location of the blockage so that they know which pipe requires to be excavated. After digging out the earth around the pipe, the plumber can fix or replace the pipe. The earth can then be filled back in around the new pipe, returning your property to its original condition. This type of work can be quite difficult, so it is best to trust a professional plumber to fix the underneath drainage problems.

Now that you know of many ways to deal with blocked drains, you can try such a DIY process to clean your blocked drain.

You Might Also Like

0 comments

Note: only a member of this blog may post a comment.