­
­

Want to Pre Purchase a Vehicle, Here is the Checklist

Private sellers and dealers who need to sell vehicles need to get Pre Purchase inspection done of the vehicle they intent to sell. The test would normally include a detailed engine test, a complete visual check and a road test or test drive, based on which a complete analysis report will be sent to the potential buyer.  Such pre purchased vehicle inspections can be done at an authorized inspection center or at the address where the vehicle is parked. The inspection center normally have a conducive place to carry out the vehicle inspection and also have all the tools handy, thus it is always recommended that such inspections are done at the center itself.


The pre purchased inspection of a car is done with a view to avoid any problems or hassles one may have to face after buying a pre-owned car. Normally people tend to hide the negatives, which may result in the new owner spending a lot of money on repairs and maintenance. The complete inspection of the vehicle will reveal any issued with the car. Therefore it is important that all key factors are inspected and properly analyzed.

The first step includes checking the external parts of the car and the condition of the outer body. This includes checking whether the windshield has any damages or cracks. The headlights, wipers, blades and other lights are functional and working properly. The body has no scratches or dents. If it is painted freshly then check for any rusting that could be covered by the paint. Next involves checking the tires. Whether the tires that are fitted are from reputed company and whether the thread on the tire is intact. There should not be any cuts, cracks or bubbles in the tires. Spare tire is inflated and is present in the vehicle along with the jack and other instruments.

The next step is to check the car engine. This is very important as the engine is the heart of the car and it needs to be in good condition for the car to work properly. Therefore a thorough and detailed check needs to be done on different components of the engine. First thing to check here is any leaks or corrosion, the engine should be clean and free of leaks. There should be no black deposit on the oil neck filler. The batter too needs to be free of corrosion. The engine should start quickly on ignition and have a good sound and there should be no burning or foul odor from the engine.

The next on the check list is the car interiors. The seat should be worn out and should adjust properly. The seat belts should be in good condition and functional. Other accessories like heater, AC, stereo should be working fine. The wipers and wiper fluids should also be checked. The doors are to open and shut freely and should not make any noise while opening and closing. The windows, alarm, headlights, hazard lights, etc. should be checked and must be in working condition.

You may also want to check the chassis and ensure that they are not bent. The trunk should be straight and frame holes must be free of scratches. The automatic transmission fluid has to be clean and not dirty as it indicates an internal transmission problem. It must not delay or slip while driving. The gears must move smoothly. The brakes must be free and functioning well. The vehicle should not pull to one side while applying brakes. The steering should also be aligned properly. It should be freely moving without making any clicking when it is turned. The records and papers related to the vehicle have to be present in the dashboard along with the title of the owner.

These pre purchase inspection will help you ensure that your car purchase is a wise one and you will not have to end up wasting a lot of money on getting it repaired and maintained once you buy it. Moreover, If you want to know more then click here and get some useful information.

You Might Also Like

0 comments

Note: only a member of this blog may post a comment.